1·Therefore, the thin films resistance to cleaning coating formed by the same extent as the thickness of the film.
因此，较薄漆膜的耐清洗程度不如由相同涂料形成的厚漆膜。
2·Methods:Samples were dried at room temperature after coating films, followed by freezing, hardening. 4% acetic acid was used to extract metals in treated samples.
方法：试样经涂膜使用温度下干燥、冷冻硬化粉碎，4%乙酸浸泡处理，石墨炉原子吸收测定胶粘剂可溶性钡、镉、铬、铅含量。
3·The technology and applications of optical films and optoelectronic films are described, the vacuum coating system and the results of application are also demonstrated.
本文介绍了光学薄膜和光电子器件用薄膜的技术和应用，以及真空镀膜及其应用结果。
4·Homogeneous and transparent thin nanostructured titania films doped by Y3 + were prepared on glass substrates by sol gel processing and dip coating technique.
用溶胶-凝胶法和浸渍-提拉法工艺，在玻璃表面上制备了均匀、透明的钇离子(Y3 +)掺杂二氧化钛纳米薄膜。
5·These test methods cover procedures for assessing the adhesion of coating films to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film.
这些试验方法覆盖了对金属涂层片附着力的评估。附着性通过在涂层切口处施加和去除透明压敏胶带来评估。
6·The results indicate that the ceramic coating films increase drastically the lifetime of the substrate metal in corrosive media and oxidizing atmosphere.
分析试验结果表明，这些陶瓷涂层大幅度提高了基底金属在腐蚀介质及氧化环境中的寿命。
7·The dependence of optical properties of PbTe films on the deposition process and the characteristics of coating material is presented.
本文介绍碲化铅薄膜的光学性质和沉积工艺及其与原材料特性的关系。
8·Changing surface structure is more effective than coating surfaces with high transmittance films for decreasing scatter levels from the glass surfaces.
对于降低玻璃表面镜反射来说，改变玻璃表面结构要比在表面镀增透膜更为有效。
9·The physical and mechanical properties of the acrylic resin films as well as the performances of the coating film on the leather were determined.
通过对比的方法测定了丙烯酸树脂成膜的物理机械性能及应用于皮革涂饰后涂层的性能。
10·Large influences of coating skill, cleanliness of construction environment and roughness of substrate's surface on films...
指出涂装技巧、施工环境清洁度、基材表面的粗糙度均对涂膜表面光泽有较大的影响。